Inhaltsverzeichnis
Werbung
The unit can be operated at an ambient temperature of max. 35°C.
The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or less
than 70 dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the requirements of the country where
you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following information
explains the requirements for power cord set selection.
•
The cord set must be approved for the country in which it is used.
•
The appliance coupler must have a configuration for mating with a
CEE22/EN6032/IEC 320 appliance inlet.
A.
For U.S. and Canada:
•
The cord set must be UL Listed and CSA Certified.
•
The minimum specifications for the flexible cord are No. 18 AWG.
B.
For Japan:
•
All components of the cord set must bear a " T " mark and registration
number in accordance with the Japanese Dentori Law.
•
The minimum specifications for the flexible cord are .75m ㎡ conductors.
C.
For Other Countries:
•
The cord set fittings must bear the certification mark of the agency
responsible for evaluation in a specific country.
•
The flexible cord must be of a HAR (harmonized) type H05VV-F.
•
The cord set must have a current capacity of a least 2.5 Amperes and
voltage rating of 125 or 250 Vac.
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons. These precautions includes the
following:
v -
-
Werbung
Inhaltsverzeichnis
