Setting The Input Function Level; Setting The Function Rename - Denon AVR-3806 Bedienungsanleitung

Advanced Setup – Part 1

Setting the Input Function Level

• Correct the playback level of the different input sources.
• Adjust the playback levels of the devices connected to the
different input sources to the same level to eliminate the need
for adjusting the main volume each time the input source is
switched.
1
CURSOR D D H H
Press the or
"Input Function Lev." at "Audio Input Setup"
ENTER
menu, then press the button.
• The "Input Function Lev." screen appears.
2
CURSOR D D H H
Press the or button to select the
CURSOR F F
input source, then press the
button to adjust the level.
The level can be adjusted between –12 dB and +12 dB in
units of 1 dB.
If "Yes" is selected for "Default", the settings are
automatically reset to the default values.
3
ENTER
Press the button to enter the setting.
• The "Audio Input Setup" menu reappears.
• After completing this setting, check that the playback levels for
the different sources are the same.

Setting the Function Rename

The names of the input sources displayed on the front display
and on the on screen display can be changed. The names or
brands of the devices connected to the input sources can be
input.
1
Press the
button to select
"Function Rename" at "Audio Input Setup"
menu, then press the
• The "Function Rename" screen appears.
2
Press the
input source whose name you want to change,
G G
or
then press the
• The screen switches to the character input screen.
Example: When "DVD" is selected and the CURSOR F F or
G G button is pressed
3
Press the
cursor (
2 2
punctuation mark you wish to input, and press
CURSOR D D
the
character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4
5 6 7 8 9
! " # % & ' ( ) * + , – . / : ; < = > ? @ [ \ ] (space)
Up to 8 characters can be input.
CURSOR D D H H
or button to select
ENTER
button.
CURSOR D D H H
or button to select the
CURSOR F F G G
or button.
CURSOR F F G G
or button to move the
to the character, number, symbol or
)
H H
or button to select that
62
ENGLISH
Advanced Setup – Part 1
4 Repeat step 3 to input the input source name.
If you wish to set the input source back to as it was initially,
press the CURSOR H H button with the input source
highlighted.
If "Yes" is selected for "Default", the setting are
automatically reset to the default name.
5 Once all the characters have been input, press
ENTER
the button.
• The "Function Rename" screen reappears.
Use the same procedure to change other input source
names as well.
6
ENTER
Press the button to enter the setting.
• The "Audio Input Setup" menu reappears.
• When the input source is selected, the display is as shown
below.
Example: When the name has been changed to "DVD-A1XV"
ENGLISH