Denon AVR-3806 Bedienungsanleitung Seite 89

Troubleshooting
Symptom Cause
• The set's internal temperature has
risen and the protection circuit has
been activated.
Power has turned off
and the power
• The core wires of the speaker
indicator is flashing
cables are touching each other or
red.
the AVR-3806's
activating the protection circuit.
• AVR-3806 is malfunctioning.
• You are playing a monaural source
Sound is only produced
(TV, AM radio broadcast, etc.) in
from the center
the DOLBY/DTS
speaker.
mode.
Measures
• Put the AVR-3806 in a well-
ventilated place.
• Turn off the power, then wait for
the set to fully cool off before
turning the power back on.
• Check the connections of all the
speaker cables.
rear panel,
• Turn off the power and contact a
DENON customer service center.
• When playing monaural sources,
select a surround mode other than
SURROUND DOLBY/DTS SURROUND mode.
Page
7
37, 38
84
ENGLISH
ENGLISH
Troubleshooting