How The Visualizer Works; Basic Preparations; Installation - WolfVision VZ-C10 Bedienungsanleitung

HOW THE VISUALIZER WORKS

HOW THE VISUALIZER WORKS HOW THE VISUALIZER WORKS HOW THE VISUALIZER WORKS
g

BASIC PREPARATIONS

BASIC PREPARATIONS BASIC PREPARATIONS BASIC PREPARATIONS
1. Connect the power cable to the unit (#28) and plug it in. 1. Connect the power cable to the unit (#28) and plug it in. 1. Connect the power cable to the unit (#28) and plug it in. 1. Connect the power cable to the unit (#28) and plug it in.
2. If you would like to use a control monitor, connect it to the following outputs: 2. If you would like to use a control monitor, connect it to the following outputs: 2. If you would like to use a control monitor, connect it to the following outputs: 2. If you would like to use a control monitor, connect it to the following outputs:
Computer monitors:Preview RGBHV output (#32) Computer monitors:Preview RGBHV output (#32) Computer monitors:Preview RGBHV output (#32) Computer monitors:Preview RGBHV output (#32)
Video monitors:Y/C (S-Video) output (#36) or Composite Video output (#37). Video monitors:Y/C (S-Video) output (#36) or Composite Video output (#37). Video monitors:Y/C (S-Video) output (#36) or Composite Video output (#37). Video monitors:Y/C (S-Video) output (#36) or Composite Video output (#37).
3. Connect a large viewing monitor or a projector to one of the outputs of the 3. Connect a large viewing monitor or a projector to one of the outputs of the 3. Connect a large viewing monitor or a projector to one of the outputs of the 3. Connect a large viewing monitor or a projector to one of the outputs of the
Visualizer. Visualizer. Visualizer. Visualizer.
For choosing the right output please read the previous page! For choosing the right output please read the previous page! For choosing the right output please read the previous page! For choosing the right output please read the previous page!
4. Turn the main power switch (#26) on the unit to "I". 4. Turn the main power switch (#26) on the unit to "I". 4. Turn the main power switch (#26) on the unit to "I". 4. Turn the main power switch (#26) on the unit to "I".
5. Press the POWER key (#23) on the remote control. 5. Press the POWER key (#23) on the remote control. 5. Press the POWER key (#23) on the remote control. 5. Press the POWER key (#23) on the remote control.

INSTALLATION

When the unit is turned on for the first time, the Height Adjustment starts automatically. The VZ-C10 is pre-set When the unit is turned on for the first time, the Height Adjustment starts automatically. The VZ-C10 is pre-set When the unit is turned on for the first time, the Height Adjustment starts automatically. The VZ-C10 is pre-set When the unit is turned on for the first time, the Height Adjustment starts automatically. The VZ-C10 is pre-set
to a distance of 2 m (78.76"). In most installations the installation height will be different to this, so the following to a distance of 2 m (78.76"). In most installations the installation height will be different to this, so the following to a distance of 2 m (78.76"). In most installations the installation height will be different to this, so the following to a distance of 2 m (78.76"). In most installations the installation height will be different to this, so the following
adjustments must be performed: adjustments must be performed: adjustments must be performed: adjustments must be performed:
1. Adjustment of camera and light focus 1. Adjustment of camera and light focus 1. Adjustment of camera and light focus 1. Adjustment of camera and light focus
2. Alignment of lightfield and camera field 2. Alignment of lightfield and camera field 2. Alignment of lightfield and camera field 2. Alignment of lightfield and camera field
NOTE: This is a one time setup, which must only be performed again if the distance between the Visualizer NOTE: This is a one time setup, which must only be performed again if the distance between the Visualizer NOTE: This is a one time setup, which must only be performed again if the distance between the Visualizer NOTE: This is a one time setup, which must only be performed again if the distance between the Visualizer
and table is changed! - more details in the installation manual and table is changed! - more details in the installation manual and table is changed! - more details in the installation manual and table is changed! - more details in the installation manual
f
b
a
e
c
d
a) light projector a) light projector a) light projector a) light projector
b) camera b) camera b) camera b) camera
c) image path c) image path c) image path c) image path
d) light path d) light path d) light path d) light path
e) mirror light (motorized) e) mirror light (motorized) e) mirror light (motorized) e) mirror light (motorized)
f) mirror camera f) mirror camera f) mirror camera f) mirror camera
g) pickup area / g) pickup area / g) pickup area / g) pickup area /
synchronized synchronized synchronized synchronized
lightfield lightfield lightfield lightfield
A light projector (a) inside the unit projects a A light projector (a) inside the unit projects a A light projector (a) inside the unit projects a A light projector (a) inside the unit projects a
lightfield (g) the same size as the pick-up area lightfield (g) the same size as the pick-up area lightfield (g) the same size as the pick-up area lightfield (g) the same size as the pick-up area
of the built-in camera via the mirror (e) onto the of the built-in camera via the mirror (e) onto the of the built-in camera via the mirror (e) onto the of the built-in camera via the mirror (e) onto the
working surface. The image is recorded by the working surface. The image is recorded by the working surface. The image is recorded by the working surface. The image is recorded by the
camera (b) using nearly the same path via the camera (b) using nearly the same path via the camera (b) using nearly the same path via the camera (b) using nearly the same path via the
mirror (f). mirror (f). mirror (f). mirror (f).
The lenses of the light projector (a) and the The lenses of the light projector (a) and the The lenses of the light projector (a) and the The lenses of the light projector (a) and the
camera (b) are synchronized. Thus the size of camera (b) are synchronized. Thus the size of camera (b) are synchronized. Thus the size of camera (b) are synchronized. Thus the size of
the light field on the working surface changes the light field on the working surface changes the light field on the working surface changes the light field on the working surface changes
when the user changes the zoom range of the when the user changes the zoom range of the when the user changes the zoom range of the when the user changes the zoom range of the
camera. camera. camera. camera.
This scanning and illumination system is a This scanning and illumination system is a This scanning and illumination system is a This scanning and illumination system is a
worldwide patent from WolfVision. worldwide patent from WolfVision. worldwide patent from WolfVision. worldwide patent from WolfVision.
6 6 6 6
MEMORY
22
HELP
21
POWER
MENU
23
19