B) Setting The Sub-Channel (Ctcss Coding); Call Function; Select Call Audio Signal - Conrad Comm Profi Bedienungsanleitung

b) Setting the sub-channel (CTCSS coding)

• Switch on the walkie-talkie.
• Press the "S" button or the "F" until "Cod" is displayed and
press the "Enter" button. The number of the current sub-
channel is displayed.
• Press buttons "S" or "F" to select the desired sub-channel.
• Drücken Sie die Taste „S" bzw. „F" um den gewünschten
• Press the "Enter" button to confirm and save the settings.
Select coding "00" if you do not wish to use
CTCSS coding. (no sub-channel is displayed
in normal operating mode)

11.4 CALL function

Press the "CALL" button to switch from receive mode to transmit
mode and send a call signal. The device transmits a call signal
to indicate to the partner walkie-talkie that you are calling it
(partner walkie-talkie emits an audio signal).

11.4.1 Select CALL audio signal

• Press the "S" button or the "F" button until "ton" is displayed
and press the "Enter" button.
• Press buttons "S" or "F" to select the desired audio signal.
The selection is played automatically.
• Press the "Enter" button to confirm and save the settings.
42