Orfeo 100
If there are new memo or incoming messages, only the new ones will be played
back. If there are no new memo or incoming messages, you will hear the old
ones.
If there are no memo messages, the machine will immediately playback the
incoming messages. If there are no messages at all, the answering machine will
say: "You have no message".
The following table summarizes how the answering machine reacts in different
circumstances:
New
New
Old
Old
Incoming Memo
Incoming
Memo
Message Message Message
Message
Yes
Yes
Yes/None
Yes/None
Yes
None
Yes/None
Yes/None
None
Yes
Yes/None
Yes/None
None
None
Yes
Yes
None
None
Yes
None
None
None
None
Yes
None
None
None
None
42
Reaction
Answering Machine
Playback of new memo
and incoming messages
Playback
of new messages only
Playback
of new messages only
Playback of old memo
and incoming messages
Playback of old incoming
messages only
Playback of old memo
messages only
Voice:
"You have no message".
6.2. INTRODUCING A PAUSE
1. Press the Pause button during message playback.
2. The answering machine introduces a pause.
3. Press the Pause button again to resume message playback.
If you wait for more than ten seconds, the answering machine switches to stand-
by. If you press the Pause button now, the answering machine will playback all
messages from the start again.
If you press another button after having pressed the Pause button once, the
machine will leave the playback mode and perform the function corresponding
to the button you pressed last.
6.3. SKIPPING OR REPEATING MESSAGES
During playback you can go to the next message by pressing the Fast Forward
button. If you press the Rewind button the present message will be repeated. If
you press the Rewind button for 1,5 sec., the previous message will be repeated.
7. ERASING MESSAGES
Do not forget to erase incoming and memo messages after playback, otherwise
the memory of the answering machine can get full.
7.1. ERASING A CERTAIN MESSAGE
To erase a certain message, press the Erase button during playback of this mes-
sage. The message will be erased and you will hear: "Message erased". Then the
answering machine will play back the following messages if there are more.
Once a message is erased it cannot be played back again. Erasing cannot be
undone.
7.2. ERASING ALL MESSAGES
After all messages have been played back, the answering machine will say: "End
of messages". Now you have 8 sec. time to erase all messages. Hold down the
Erase button for 1,5 seconds to erase all messages. Then you will hear: "All mes-
sages erased". When all messages are erased they cannot be played back again.
Erasing cannot be undone.
43
Orfeo 100