Erasing Messages; Memory Full; Remote Operation - Topcom butler 4056C Bedienungsanleitung

Butler 4056/4056C
• During playback, you can:
- go to the beginning of the current message by pressing the
- go to the previous message by pressing the
- stop playback by pressing the Stop
- interrupt playback by pressing the Pause key
restart playback.
- go to the next message by pressing the

8.14 ERASING MESSAGES

8.14.1 Erasing Messages One at a Time during Playback
Start message playback as explained above.
• When the message to be erased starts playing, press the delete
• During erase the internal voice will tell you that the message is being erased.
• The machine will start playing the next message.
8.14.2 Erase all messages
One can also erase all heard messages at one time. This erases only the messages that have
already been heard. New messages are not erased.
• Press the delete
• The internal voice confirms that the messages have been erased by saying how many
new (unheard) messages there are.

8.15 MEMORY FULL

If the memory is full, MEMORY FULL-LED will flash. If the answering machine is turned on
and a call comes in, the machine will automatically play OGM 2 (answering machine function
without recorded caller message).
When listening to the messages, the internal voice will say that the memory is full and then
play back the messages.
• Erase all the messages after listening to them.
• The memory is free again.

8.16 REMOTE OPERATION

The answering machine can only be operated remotely using a tough-tone phone (DTMF
tone selection system).
• Call your machine.
• The answering machine picks up the line, you hear the outgoing message and a beep.
• After the beep, slowly dial the VIP code (default 321).
• You will hear two short beeps for confirmation.
• Enter the next codes to use the desired function:
a) Listening to Messages
• Press '2' (listen to messages). The answer machine will play the messages.
During playback, you have the following options:
• Press '2' to stop playback.
• Press '2' to restart playback.
30
key for 2 secs.
key twice.
key .
. Press the Pause key
key.
key once.
again to
key for 2 secs
Butler 4056/4056C