Barring Calls; Changing Flash Time - Auerswald comfort dect 610 Bedienungsanleitung

Barring Calls

It is possible to set the phone to restrict numbers that
can be dialed. Calls beginning with the numbers you
specify using this menu can not be dialed.
You can set up to 4 different restricted numbers
containing up to 4 digits each.
To activate or deactivate a call barring number:
1. Press the MENU soft key to display the
Main menu items.
2. Press the or
Settings, and press the SELECT soft
key.
3. Enter the current base PIN to access the
BS Settings menu, and press the
SELECT soft key.

Changing Flash Time

The FLASH soft key allows you to transfer a call to
another extension. For details, see page 14. If your
FLASH key does not work properly, you need to
adjust the Flash time.
To change the Flash time:
1. Press the MENU soft key to display the
Main menu items.
2. Press the or
Settings, and press the SELECT soft
key.
3. Enter the current base PIN to access the
BS Settings menu, and press the
SELECT soft key.
B S
ASE ETTINGS
38
key to choose BS
key to choose BS
4. Press the or
Bar, and press the SELECT soft key.
5. Press the or
memory location, and press the SELECT
soft key.
6. Press the or
activate, or OFF to deactivate, and then
press the SELECT soft key.
7. If you select ON, enter the number you
want to restrict, up to four digits, and
then press the SELECT soft key.
8. To exit, press the
4. Press the or
Time, and then press the SELECT soft
key.
Result: The current setting appears inside the box with a
check symbol.
5. Press the or
flash time and then press the SELECT
soft key.
Result: You can choose from 8 8 0 0 m m s s , 1 1 0 0 0 0 m m s s , 1 1 2 2 0 0 m m s s ,
1 1 8 8 0 0 m m s s , 2 2 5 5 0 0 m m s s , 3 3 0 0 0 0 m m s s , 5 5 0 0 0 0 m m s s , or 6 6 0 0 0 0 m m s s .
6. To exit, press the
N N o o t t e e : : For setting the flash time please refer to your
provider or to the operating manual of your tele-
phone system. The relevant phone number of the
service center can be obtained from your provider.
MENU 5 4
key to choose 4:Call
key to choose the
key to choose ON to
key.
MENU 5 5
key to choose 5:Flash
key to choose the
key.