Special Functions; Settings For The Mobile Unit; Setting The Ring Tone; Ring Tone Volume On The Handset - switel CD727 Bedienungsanleitung

8 Special functions

All further programming functions can be accessed by means of a very user-friendly menu. Here are a few
general instructions to help you find your way around the menu:
Programming is started by means of the MENU display button.
You can find the required menu item with the up and down cursor buttons.
This level is opened with the OK display button.
You can then again find the required function using the up and down cursor buttons and again confirm with
the OK display button.
You can go back one level each time by pressing the BACK display button.
You can leave programming mode at any time without making any changes by pressing and holding the
button.
8.1

Settings for the mobile unit

Handset
8.1.1

Setting the ring tone

Your handset can respond with five different ring tones when a call comes through. If you are using the
telephone system with several handsets, you can set different ring tones for external and internal calls.
8.1.2

Ring tone volume on the handset

The volume of the ring tone on the handset can be adjusted in five steps. If at any time you do not want to be
disturbed, you can also turn the ring tone off altogether. If the ring tone is turned off, incoming calls will only be
signalled at the base station and by means of the display on the handset.
8.1.3

Changing display names

In normal operation, the message "CD727" appears in the display. If you have logged on several handsets to
one base station, it can be useful to give each handset its own name. The number after the name shows with
which number the handset can be called internally.
8.1.4

Setting the display language

The display messages can be set up in German, English and French.
74
- Special functions -
Ringtone
Ring Volume
Handset Name
Language
Picture
Menu Colour
Auto Talk