KERN pej Betriebsanleitung Seite 158

7. Save:
8. To enter the numeric value for the
upper limiting value, repeat steps 5 -
6
9. Save:
The balance returns to tolerance weigh-
ing mode.
From here evaluation takes place
whether the goods to be weighed are
within the two tolerance limits.
To enter 3 or 4 limiting values [L1 SET] - [L3 SET] or [L4 SET], repeat steps 5 to 7
(see also chapter 12.4.2).
68
An acoustic signal sounds, the saved
lower weighing value is briefly displayed.
H. � SET
K
The flashing display (last saved value)
prompts you to enter the upper limiting
value
An acoustic signal sounds, the saved
upper limit is briefly displayed.
PES/PEJ-BA-e-1617
�