Percent Determination; Determination Of The Reference Weight By Weighing - KERN PLJ 600-2GM Betriebsanleitung

 Confirm by pressing
displayed
 Place the test items, the entered tolerance range is
displayed by „Min", „OK" and „Max"
The value entered for the upper tolerance limit must be greater than the lower
tolerance value. Error message –Lo- appears on the display and the display returns
to weighing mode.

8.10 Percent determination

Percent determination allows weight display in percent, in relation to a reference
weight.

8.10.1 Determination of the reference weight by weighing

Operation:
 Selection of menu item P4 Func
TARE
 Press
TARE
 Press
, the menu item set as last flashes
 Press
repeatedly until „HiLo" is displayed flashing
TARE
 Press
F
 Press
repeatedly until "SAVE?" appears
 Confirm by pressing
F
 Press
, „0.0" appears and % is displayed flashing
PLJ-GM-BA-e-1614
PRINT
, „0.0" appears and „Min" is
PRINT
, „0.0" appears
0.0 g
Display:
P4 Func
4.1.FFun
PcS
(Example)
PrcA
4.1.FFun
SAVE?
0.0 g
%
0.0
39