KERN pej Betriebsanleitung Seite 152

7. Place sample for the upper (i.e. larg-
er) limiting value on the weighing
plate:
8. Save:
The balance returns to tolerance weigh-
ing mode.
From here evaluation takes place
whether the goods to be weighed are
within the two tolerance limits.
* If you want to set for your tolerance weighing only one limit point
(parameter selection [23.�P
62
An acoustic signal sounds, the saved
upper limit is briefly displayed.
.1]
)
, ignore step 7 and 8.
1
PES/PEJ-BA-e-1617