C) Modes Of Operation - Conrad FHT8 Bedienungsanleitung

After setting of the second lowering temperature time and
confirming the setting by pressing the „PROG" key the nor-
mal operating mode is active again.
The scale displayed on the bottom of the LC display follows
the changes as they are being made, i.e. the effect on the
day profile is immediately visible.
Please note that the temperature at the end of the previ-
ous day is not displayed. This means that it may be that
the heating phase at the end of the previous day is con-
tinued the next day. However, this is not displayed during
programming!
c) Operating modes
Press the "FUNKTION" key to change the operating mode.
Press this key several times to scroll through the different
operating modes:
Urlaub/Party-
Automatic operation Manual operation Holiday/party
Automatikbetrieb
Manueller Betrieb
Funktion
function
• Automatic operation
In the automatic operating mode (display "Auto" on the LC
display) the room temperature is controlled according to the
set program for the weekday.
The temperature history for the current weekday is dis-
played on the bar scale on the bottom of the display.
A temporarily temperature change can be set easily with
the selection wheel. The next time a regular temperature
change is scheduled the thermostat will then automatically
return to the time-controlled program.
60