Conrad FHT8 Bedienungsanleitung Seite 67

b) Selecting the temperature unit ("°C°F")
You may set whether the temperature is to be displayed in
degrees Celsius (°C) or degrees Fahrenheit (°F).
• Press the "PROG" key until "Sond" is displayed (for spe-
cial function).
• Use the selection wheel to select the special function
"°C°F".
• To confirm your selection, briefly press the "PROG" key.
• Use the selection wheel to switch between "°C" and
"°F".
• To confirm your selection, briefly press the "PROG"
key. The heating control returns to the normal operating
mode.
c) Setting of date and time ("dAt")
• Press the "PROG" key until "Sond" is displayed.
• Use the selection wheel to select the special function
"dAt".
• To confirm your selection, briefly press the "PROG" key.
67