Conrad FHT8 Bedienungsanleitung Seite 69

• The following data are displayed:
• Use the selection wheel to select the second part of the
code (a number between "000" and "099") and confirm
this selection by briefly pressing the "PROG" key.
• The following data are displayed:
Now you have to synchronise the (first) valve operating
mechanism ("001" on the display) to the new safety code.
Proceed as follows to synchronise the data:
• Remove the battery compartment cover of the (first) valve
operating mechanism by sliding it down.
• Press the key of the valve operating mechanism for about
3 seconds until you hear an acoustic signal (3 separate
tones). The valve operating mechanism is now ready to
receive, "AC" is displayed.
• Press the "PROG" key on the "FHT8R" heating control to
start transmission of the safety code to the valve operat-
ing mechanism.
• The valve operating mechanism acknowledges correct
MO DI MI DO FR SA SO
6 12
0
MO DI MI DO FR SA SO
6
0
18 24
12
24
18
69