Flash Parameters (Parameter Menu); Setting Procedure For The Flash Parameters - Metz MECABLITZ 58 AF-2 Leica Bedienungsanleitung

Setting procedure:
F 4.0
MZoom 24
4,6 m P1/1
+
Para –
2.1 m P1/32
Para – +
The secondary reflector is not supported in the
Stroboscopic flash mode. If the secondary reflec-
tor was activated in the select menu, it will not
also flash in the Stroboscopic flash mode! In the
display, the symbol for the secondary reflector
will not be shown!
Para
+
–

6 Flash parameters (Parameter menu)

6.1 Setting procedure for the flash parameters

When a button is pressed for the first time, the LC display is illuminated.
Para
Table 1