Display Illumination; Operating Modes (Mode Menu); Adjusting Procedure For Flash Operating Modes - Metz MECABLITZ 58 AF-2 Leica Bedienungsanleitung

4 Display illumination

5 Operating modes (mode menu)

TTL
M
Depending on the type of camera, other flash modes may be supported.
These flash operating modes can be selected and activated in the mode
menu following a data transfer with the camera. Depending on the
system, some camera models (depending on the camera's operating
mode) only support the TTL flash mode. Other flash modes (automatic A,
manual M etc.) cannot be selected or activated!

5.1 Adjusting procedure for flash operating modes

TTL
TTL
HSS
A
M
M
HSS
A
A
If the camera does not transfer one or more flash parameters to the flash
unit, you will have to adjust these settings by hand (see 6).
TTL
M
TTL HSS
Mode
A A
M
Set