Yamaha DPX-1000 Bedienungsanleitung Seite 18

I Other functions
STILL — freezing the image
Press the STILL button on the remote control to capture a frame
from a moving image. Press STILL once more to resume normal
projection.
ASPECT
LIGHT
STILL STILL
S VIDEO
VIDEO
MEMORY
1
4
HIDE — turning off the image temporarily
Press the HIDE button on the remote control to temporarily turn of
the projected image. Press the HIDE button once more to resume
normal projection.
ASPECT
LIGHT
STILL
S VIDEO
VIDEO
MEMORY
1
4
INPUT
HIDE
INPUT
A DVI
B D4
2 3
5 6
RESET
INPUT
HIDE
HIDE
INPUT
A DVI
B D4
2 3
5 6
RESET
I Indicators
There are 5 indicators on the main unit that display the operating
status of the DPX-1000.
STANDBY/ON
1
ESCAPE
PATTERN
ASPECT
LAMP COVER
2
3 4
1 STANDBY/ON
(There is also an LED on the front panel of the
main unit.)
Off The power is turned off.
Steady orange Standby mode
Blinking green Startup mode
Steady green Operating
Blinking orange Lamp cooling prior to going into Standby
mode
Blinking red or red One of the LAMP/COVER/TEMP/FAN
and orange lights is also red.
Consult a YAMAHA dealer or service
center if this occurs.
2 LAMP
Off Normal
Blinking orange Lamp usage has exceeded 2000 hours.
Steady red The lamp has burnt out.
3 COVER
Off Normal
Steady red Either the lamp cover or the filter cover is
not correctly attached.
4 TEMP
Off Normal
Steady red Either the internal temperature of the unit
or the temperature of the lamp is
abnormally high.
5 FAN
Off Normal
Steady red The cooling fan is not working properly.
Basic Operations
MENU
SETTING
INPUT
TEMP FAN
5
15
E-