Yamaha DPX-1000 Bedienungsanleitung Seite 20

I 1 <IMAGE> ........
Input signal
BLACK LEVEL
Video/Component,
RGB TV Adjusts the level of blackness in an image while maintaining peak white brightness. Increasing
the black level will increase the luminosity of dark scenes and clarify picture tone, however it
will also lower the contrast. Reducing the black level will increase the contrast in dark scenes
but will reduce the clarity of black tones.
Video/Component, WHITE LEVEL (*CONTRAST)
RGB TV, *RGB PC Increases the level of whiteness in an image without changing the luminosity of the darker parts
of the image. Increasing the white level will brighten the white areas of an image and increase
contrast, however it will also reduce the clarity of white within the image. Reducing the white
level will lower contrast.
*RGB PC (*BRIGHTNESS)
Controls the total brightness of an image. When set too high, the black portion of the image
becomes grayish and the white portion of the image tends to be saturated. When set too low, the
entire image becomes darker.
White
Output image
Black
GAMMA TRIM
Video/Component,
RGB TV, RGB PC Adjusts the response of the color gradation and gray scale within the image. There are ten
patterns available, on two pages of five patterns each. Use the
pages, and select the appropriate pattern for the contents to be viewed.
Video/Component, HUE
RGB TV Adjusts the hue of the image. Reducing this setting increases the amount of red in the image.
Increasing it will add blue to the image.
SATURATION
Video/Component,
RGB TV Adjusts color depth. Reducing the value of this setting lightens the color of the image, while
increasing it will increase the depth of color.
COLOR TEMP.
Video/Component,
RGB TV, RGB PC Adjusts the level of white in colors between red and blue, and between green and magenta. A
lower setting adds more red to the colors giving a more relaxed feel to the image, while a higher
setting adds more blue, resulting in "fresh" color tones. Also, increase the hUV to give more
green to the image, or reduce it to add more magenta.
You cannot adjust these settings without an input signal.
BLACK LEVEL
White
White Black
Input signal
S
COLOR TEMP. ADJUSTMENT
hUV
+
Menu Item
WHITE LEVEL
(*CONTRAST)
White
Input signal
key to switch between the
Color temp. adjustment
–
Menu structure
Adjustment range
–100 to 0 to +100
–100 to 0 to +100
(*0.50 to 1.00 to 1.50)
–100 to 0 to +100
(*BRIGHTNESS)
White
Black White
Input signal
A/B/C/D/E
a/b/c/d/e
–100 to 0 to +100
0 to 100 to 200
5000K to 6000K
to 10000K (COLOR TEMP.)
–0.020UV to ±0.000 to
+0.020UV (hUV)
17
E-