Standby Mode - Yamaha YSP-1400 Bedienungsanleitung

Playing back audio from a
unit
1
Press the BLUETOOTH key on the supplied remote control to select
as the input source.
The BLUETOOTH indicator on the front panel lights up in green.
2
Turn on the
When Bluetooth connection is made correctly, the BLUETOOTH indicator of the
unit flashes 3 times.
3
Play back a song on the device.
NOTE
• Perform Bluetooth connection with the device and unit within 10 meters (33 ft) of each other.
• It may be necessary to select "YSP-1400 Yamaha" in the Bluetooth device list again, in the event that a
connection problem occurs. You may have to change the output setting to output audio to the unit,
depending on the Bluetooth device you are using.
• Adjust the volume level of the Bluetooth device as required.
• If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect
with the new device.
Terminating
Bluetooth connection is terminated in the following cases. When the Bluetooth
connection is terminated, the BLUETOOTH indicator flashes once.
• The compatible device is turned off.
• The BLUETOOTH key is pressed for more than 3 seconds.
• The unit is turned off.
12
device on the
Lights up
device.
Flashes 3 times
connection
Using the

standby mode

The Bluetooth standby mode allows you to turn on (or off) the unit automatically, that
interlocked by the operation of the Bluetooth device.
How to set
With the unit turned on, hold down the BLUETOOTH STANDBY key for
more than 3 seconds.
Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the
mode between enabled and disabled.
When the Bluetooth standby mode is enabled and the unit is turned off, the STATUS
indicator lights up in red.
Lights up (red)
Functions available on devices with
Power on interlock function (when the unit is turned off)
When Bluetooth connection is made on the device, the unit will turn on and will be ready to play back
sound from the device.
Power off interlock function (when the unit is turned on)
The unit will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when
BLUETOOTH is selected as the input source.)
Using the Home Theater Controller application
By installing the dedicated free application "Home Theater Controller" to a Bluetooth
device, such as a smartphone, you can perform various operations easily and
conveniently with the Bluetooth device. (Setting items: basic operation, surround mode,
sound adjustments)
For details on "Home Theater Controller", see the product information on our website.
Flash 3 times (enabled), flash once (disabled)
standby mode enabled