Yamaha YSP-1400 Bedienungsanleitung Seite 11

(power) key
Turns on or off (standby) the unit.
Green (turned on)
Red (Bluetooth standby)
Off (turned off)
BLUETOOTH STANDBY key
Enables/disables the Bluetooth standby mode
(p.12).
Surround mode / STEREO keys
Choose from five different types of surround
playback (surround mode keys), or stereo (2-
channel) playback. When the surround playback is
selected, the sound field program "CINEMA DSP"
provides realistic surround effects (p.10).
MOVIE / MUSIC /
Lights up (surround playback)
SPORTS / GAME /
TV PROGRAM
STEREO Off (stereo playback)
HINT
• When 2-channel stereo signals are played in surround,
the PLII indicator lights up.
Lights up (Dolby Pro Logic II)
LEARN key
Sets the unit to the TV remote control learning
mode (p.13).
REPEATER key
Enables/disables the TV Remote Repeater
function (p.15).
4
CLEAR VOICE key
Enables/disables the clear voice function.
When this function is enabled, you can enjoy clear
voice sounds while watching movies, TV dramas,
news programs or sports programs.
Flash 3 times (enabled), flash once (disabled)
UNIVOLUME key
Enables/disables the UniVolume function.
When this function is enabled, consistent volume
is maintained between channels, programs,
5
commercials and sound sources.
Flash 3 times (enabled), flash once (disabled)
AUDIO DELAY key
Adjusts the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio
delay.
1 Hold down AUDIO DELAY for more than 3
seconds.
The left most indicator flashes.
2 Press SUBWOOFER to adjust the audio delay.
6
Smaller delay (–)
3 To finish the adjustment, press AUDIO DELAY.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
7
YSP POSITION (YSP position) keys
For optimum surround sound effect, select a
preset position mode according to where the unit
is installed.
Hold down the selected YSP POSITION key for
more than 3 seconds until the respective
indicators on the front panel flash.
L (Left) key..........When the unit is installed on the
C (Center) key ....When the unit is installed in the
R (Right) key.......When the unit is installed on the
NOTE
• The default setting is for the center. Select the desired
setting to match your installation.
Decoder indication
The unit supports the following audio signals. You can
check the type of the input audio signal by the color of
the indicator.
Green (Dolby Digital), Red (DTS Digital Surround)
Off (PCM)
Auto-sleep function
The unit will be automatically turned off when one of the
following conditions is met.
• No operations for 8 hours
• No audio input and no operations for 30 minutes
Larger delay (+)
8
left side of the room
center of the room.
right side of the room.
9