Error Code - Philips FC8810 Handbuch

Error code

Possible cause
E1 Wheels stuck
E2 Top cover or dust
container not
placed properly
E3 Bumper stuck
E4 Robot lifted up
from floor
E5 Colour of floor too
dark
E6 Battery not
inserted properly
Charging error
Error codes
Solution
Remove the robot from the obstacle and press the
on/off button to resume cleaning.
Place the dust container in and the top cover on the
robot properly. The error code disappears from the display
automatically.
Remove the robot from the obstacle. The error code
disappears from the display automatically.
Put the robot back on the floor to make the error code
disappear.
Place the robot on a lighter area of the floor. Clean the
drop-off sensors.
Read the instructions in 'Inserting the rechargeable battery
into the robot' in chapter 'Before first use'.
Check if the power switch is in 'on' position when the robot
is on the docking station.
ENGLISH
25