Starting And Stopping - Philips FC8810 Handbuch

ENGLISH
12
3 When the rechargeable battery is fully charged, the battery indicator
on the display of the docking station and the light in the on/of button
on the robot stop flashing.
Note: The robot only returns to the docking station automatically when it
started cleaning from the docking station.
Charging directly from the mains
1 Insert the small plug of the adapter into the socket on the robot
(1). Insert the adapter into a wall socket (2).
2 Press the power switch to switch on the robot.
3 When the robot is connected to the mains correctly, the light in
the on/off button of the robot starts flashing. This indicates that the
rechargeable battery is being charged.
4 When the rechargeable battery is fully charged, the light in the
on/off button of the robot stops flashing.
Preparing the room for a cleaning run
- Before you start the robot on its cleaning run, make sure that you
remove all loose and fragile objects from the floor.
Using your robot

Starting and stopping

1 Press the on/off button. The light in the on/off button goes on and
the robot starts cleaning.
- You can press the on/off button on the robot.
- You can also press the on off button on the remote control or on the
pointer (FC8820).