Sorting Preset Dtv Channels; Selecting A Digital Audio Format; Selecting Languages For Audio, Subtitles, And Teletext; Using Software Update - Pioneer PDP-4270XD Bedienungsanleitung

09 Enjoying DTV broadcasts

Sorting preset DTV channels

Use the following procedure to change the sequence of the preset DTV
channels.
1 Repeat steps 1 to 4 provided for "Setting Channel Options".
2 Select "Channel Sort" (/ then ENTER).
The Sort screen appears.
3 Select a channel to be shifted (/// then ENTER).
Channel Sort
001
************
002
******
003
************
004
******
005
************
006 ************
4 Select a new location (/// then ENTER).
Sorting is executed.
5 Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step 4, select / on the
screen with /// to select a page, and then press ENTER.
• You can select "DTV Setup" only when watching DTV channels.

Selecting a digital audio format

Use the following procedure to switch between the PCM and Dolby
digital audio format.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "User Preferences" (/ then ENTER).
5 Select "Digital Audio" (/).
6 Select "PCM" or "Dolby" (/).
User Preferences
Digital Audio
Language Settings
Note
• You can select "DTV Setup" only when watching DTV channels.
38
En
1/3
007
************
008
************
009
******
010
************
011
******
012
************
PCM
Selecting languages for audio, subtitles, and
teletext
You may manually configure language settings for audio, subtitles,
and teletext.
1 Repeat steps 1 to 4 provided for "Selecting a digital audio
format".
2 Select "Language Settings" (/ then ENTER).
3 Select "Primary Audio", "Secondary Audio", "Primary
Subtitle", "Secondary Subtitle" or "Teletext" (/).
4 Select a language (/).
Note
• The plasma television automatically selects the language based on
the "Country" setting (page 25) when the selected language for
audio, subtitle, or teletext is not available.
• You can select "DTV Setup" only when watching DTV channels.

Using Software Update

This function downloads and updates the system's software at the
specified timing.

Using Auto Update

With this function on, the plasma television checks if updated software
is available and then downloads it (as necessary). After this, the
system executes Add New Channels operation (page 35). This series of
operations are automatically executed at the specified time.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "DTV Setup" (/ then ENTER).
4 Select "Software Update" (/ then ENTER).
5 Select "Auto Update" (/).
6 Select "On" (/).
Software Update
Auto Update
Set Update Time
Start Manual Update
Technical Information
Note
• We recommend that you normally select "On".
• For Auto Update to start, there must be more than 1 hour left to the
start of the next preset recording/watching.
On