Using Cti; Using Colour Management; Using Colour Space; Using Intelligent Colour - Pioneer PDP-4270XD Bedienungsanleitung

08 Setting up

Using CTI

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Colour Detail" (/ then ENTER).
5 Select "CTI" (/ then ENTER).
6 Select the desired parameter (/ then ENTER).
CTI
Provides images with clearer colour contours. The CTI stands for Colour Transient
Improvement.
Selections Off
On
7 Press HOME MENU to exit the menu.

Using Colour Management

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Colour Detail" (/ then ENTER).
5 Select "Colour Management" (/ then ENTER).
6 Select an item to be adjusted (/ then ENTER).
Colour Management
R
Y
G
C
B
M
7 Select the desired level (/).
 button
Item
R
Closer to magenta
Y
Closer to red
G
Closer to yellow
C
Closer to green
B
Closer to cyan
M
Closer to blue
30
En
Deactivates CTI.
Activates CTI.
0
0
0
0
0
0
 button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
• To perform adjustment for another item, press RETURN, and then
repeat steps 6 and 7.
• You may press / to immediately change an item to be adjusted.
8 Press HOME MENU to exit the menu.

Using Colour Space

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Colour Detail" (/ then ENTER).
5 Select "Colour Space" (/ then ENTER).
6 Select the desired parameter (/ then ENTER).
Colour Space
Changes the colour reproduction space.
Selections 1 Optimized for vivid, vibrant colour reproduction.
2
7 Press HOME MENU to exit the menu.

Using Intelligent Colour

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Colour Detail" (/ then ENTER).
5 Select "Intelligent Colour" (/ then ENTER).
6 Select the desired parameter (/ then ENTER).
Intelligent Colour
Performs such compensation that results in the optimum colour tones for images.
Selections Off
On
7 Press HOME MENU to exit the menu.

Eliminating noise from images

1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "NR" (/ then ENTER).
5 Select an item to be adjusted (/ then ENTER).
You can select "DNR", "MPEG NR" or "BNR".
6 Select the desired parameter (/ then ENTER).
Standard colour reproduction.
Deactivates Intelligent Colour
Activates Intelligent Colour.