Setting Child Lock; Selecting A Decoder Input Terminal; Sorting Preset Tv Channels; Clock Setting - Pioneer PDP-505XDE Bedienungsanleitung

09 Basic Adjustment Settings

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned
and watched.
1
Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), perform the following steps.
2
Select "Child Lock" ( / ).
3
Select "Block" (
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Label
Child Lock
Decoder
• The selection is switched between "View" and
"Block".
4
Press HOME MENU to exit the menu.

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input
terminal (INPUT1).
1
Repeat steps 1 to 4 provided for Using Manual Adjust.
After selecting a channel for label entry (using
Programme Entry), do the followings steps.
2
Select "Decoder" ( / ).
3
Select "INPUT 1" ( / ).
Label
Child Lock
Decoder
4
Press HOME MENU to exit the menu.
• With "Off" (factory default) selected, you cannot watch any
images from the decoder.
30
En
/
).
1
42. 75MHz
B/G
Auto
Yes
ABCDE
Block
Off
ABCDE
Block
INPUT1

Sorting preset TV channels

Use the following procedure to change the sequence of the
preset TV programmes.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Sort" ( / then ENTER).
• The sort screen appears.
Sort
09
01 56789 10
02 01234 11
03 55555 12
04 01234 13
05 56789 14
06 01234 15
07 56789 16
08 01234 17
5
Select a channel to be shifted ( / ,
6
Select a new location ( / ,
• Sorting is executed.
7
Press HOME MENU to exit the menu.
• To change a page on the Sort screen in step 6, select 5/∞
on the screen with / to select a page, and then press
ENTER.
• The above procedure transfers and sets only the shifted
channel information to recording equipment such as a VCR
or DVD recorder.

Clock setting

Use the following procedure to set the time correctly.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Clock" ( / then ENTER).
5
Select "Clock Set Programme" ( / ).
6
Select a TV channel to be used for auto clock setting
/
( ).
Clock
02/07/2004 FRI 0:00
Clock Set Programme
7
Press HOME MENU to exit the menu.
• If the system fails to set the date and time through the
selected TV channel, the "Time & Date" entry screen
appears. Set the correct, current time.
then ENTER).
1/4
01234 18 01234
56789 19 56789
01234 20 01234
56789 21 55555
01234 22 01234
56789 23 56789
01234 24 01234
56789 25 56789
01234
/ then ENTER).
/ then ENTER).
then ENTER).
1 ABCDE