2. Sound-controlled
DMX-controlled operation
You can control the devices individually via your DMX-controller.
Select a mode with control channel 1:
Mode 1: 33 DMX-channels; mode and 4 channels per spot: red, green, blue, dimmer
Mode 2: 17 DMX-channels; mode and 4 channels for every 2 spots: red, green, blue, dimmer
Mode 3: 9 DMX-channels; mode and 4 channels for every 4 spots: red, green, dimmer
Mode 4: 5 DMX-channels; mode and 4 channels for all 8 spots; red, green, dimmer
Press the MODE button until the appropriate LED (AUDIO) lights up on the
display.
Now, select the desired chaser (Pr01 – Pr16) via the UP or DOWN buttons.
Adjust the audio input level via the sensitivity control.
After switching on, the LED WMB-bar will automatically detect whether
DMX 512 data is received or not. If the data is received, the control LED
flashes.
22/28
51930310_V_1_0.DOC