Cleaning And Maintenance - EuroLite LED WMB-830 RGB Bar Bedienungsanleitung

Mode DMX-value
1-4 0-255
5-6 0-255
Mode DMX-value
1-4 0-255
5 0-255
Mode DMX-value
1-4 0-255
Mode DMX-value
1-3 0-255
Mode DMX-value
1-3 0-255
Mode DMX-value
1-3 0-255
Mode DMX-value
1-3 0-255
Mode
1 etc. until control-channel 33
2 etc. until control-channel 17

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
control-channel 3
Characteristic
green
brightness
control-channel 4
Characteristic
blue
speed
control-channel 5
Characteristic
dimmer
control-channel 6
Characteristic
red
control-channel 7
Characteristic
green
control-channel 8
Characteristic
blue
ontrol-channel 9
Characteristic
dimmer
24/28 51930310_V_1_0.DOC