Herunterladen Inhalt Inhalt Diese Seite drucken

Connection Status; Establishing A Connection; Telephone Calls - Medion LIFE P62033 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

 As soon as the mobile phone has found the radio, a corresponding message will
appear on the mobile phone (e.g. NEW DEVICE FOUND or similar).
The car radio will be shown on the mobile phone and you may by asked to enter
a password. Enter the password "0000" for your car radio CAR KIT shown on
the mobile phone.
 The message "LINKED" will appear on the car radio and, when the mobile
phone has been recognised, the Bluetooth name of the mobile phone.

11.2. Connection status

The Bluetooth symbol in the display indicates which connection status currently ex-
ists:
No Bluetooth symbol: no connection.
Bluetooth symbol: connection has been established;
If a connection has been established, incoming and outgoing calls will be trans-
ferred from the mobile phone to the car radio.

Establishing a connection

 You can establish a connection by executing the corresponding function on the
mobile phone.
Breaking the connection
 You can break the Bluetooth connection via the mobile phone.
If the devices have been switched off and then switched back on again, the car ra-
dio will automatically search for connected devices. This takes about 10–15 seconds.
Terminating/restoring the connection on the car radio
 Hold down the SCAN button. The car radio will terminate the Bluetooth con-
nection.
 Hold down the SCAN button again. The Bluetooth connection will be restored.

11.3. Telephone calls

 Make sure your mobile phone is switched on and place it near the car radio.
Select numbers
You can enter the telephone number via your mobile phone as normal.
Alternatively, you can enter the telephone number using the remote control, as fol-
lows:
 Briefly press
 Enter the telephone number using the remote control's numeric buttons.
 If you have made a mistake, you can delete the numbers with the T-MEN/TRAN
button.
1
In early Bluetooth models, e.g. mobile phones with Bluetooth protocol 1.0, the display may appear
diff erent to that described here. In some cases, the mobile phone's ring tone may also not be trans-
ferred.
84003 DE EN eCommerce Content final REV4.indb 79
84003 DE EN eCommerce Content final REV4.indb 79
. PHONE appears on the display.
DE
EN
1
79 of 86
28.05.2015 09:09:22
28.05.2015 09:09:22

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Md 84003

Inhaltsverzeichnis