Troubleshooting Tips - Klarstein 10027045 Bedienungsanleitung

Cleaning the Door
To clean door, use only a soft warm, damp rag. To prevent penetration of water into the door lock do not
use a spray cleaner of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces
because they will scratch the fi nish. Some papers towels can also scratch or leave marks on the surface.
How to Keep Your Dishwasher in Shape
• After every wash: Turn off the water supply to the appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
• Remove the plug: Before cleaning or maintenance, always remove the plug from the socket.
• No solvents or abrasive cleaning: To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Use only a cloth and warm soapy water. To remove
spots or stains from the surface of the interior, use a cloth dampened with water and a little white
vinegar, or a cleaning product made specifi cally for dishwashers.
• When You go on holiday: It is recommended that you run a wash cycle with the dishwasher empty
and then remove the plug from the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer.
• Moving the Appliance: If the appliance must be moved, try to keep it in the vertical position. If
absolutely necessary, it can be positioned on its back.
• Seals: One of the factors that cause odors to form in the dishwasher is food that remains trapped
in the seals. Periodic cleaning with a damp sponge will prevent this.
Error codes
When some malfunctions happen, the appliance will display error codes to warn you.
Code Bedeutung
E1 Door open
E2 Water inlet
E3 Water drainage
E4 Temperature sensor
E5 Overfl ow/leakage
E6 Water leakage
E7 Heating element
E8 Water diversion system
WARNING
If overfl ow occurs, turn off the main water supply before calling a service. If there is water
in the base pan because of an overfi ll or small leak, the water should be removed before
restarting the dishwasher.
Fehlerbehebung
Reviewing the charts on the following pages may make you be free of calling for service:
Problem Possible causes
Dishwasher Fuse blown, or the circuit
doesn't run breaker acted
Power supply is not turned
on
Water pressure is low

Troubleshooting Tips

Mögliche Ursache
The door is opened when the dishwasher is operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overfl ow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating
Water diversion system malfunction
What to do
Legen Sie den Sicherungsschalter um, drehen Sie die Siche-
rung rein oder ersetzen Sie diese.
Vergewissern Sie sich dass das Gerät eingeschaltet und die
Tür fest geschlossen ist. Stellen Sie sicher, dass der Stecker
in der Steckdose steckt.
Prüfen Sie ob der Wasserhahn voll aufgedreht ist und alle
Verbindungsschläuche angeschlossen sind.
36