Troubleshooting - Klarstein Oceana Bedienungsanleitung

TROUBLESHOOTING

Problem
Dishwasher does not start.
Water not pumped form
dishwasher
Stained tub interior
Possible Causes
Fuse blown, or the circuit
break tripped.
No power.
Water inflow abnormal or
water pressure is too low.
Door of dishwasher not
properly closed.
Twisted or trapped drain
hose.
Filter clogged.
Kitchen sink clogged.
Detergent with colourant
may have been used.
Solution
Replace fuse or reset
circuit breaker.
Remove any other
appliances sharing
the same circuit with the
dishwasher.
Make sure the dishwasher
is turned on and the door
is closed securely.
Make sure the power cord
is properly plugged into
the wall socket
Check that the water
supply is connected
properly and the water is
turned on.
Make sure to close the
door properly and latch it.
Check the drain hose.
Check the filters.
Check the kitchen sink to
make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.
Make sure that the
detergent has no
colourant.
EN
49