Cleaning And Maintenance - EuroLite SUPERSTAR Bedienungsanleitung

The functions of the controler are as follows:
OFF: All lamps are off.
Derby: 2 x 220 V/300 W are on
Unico: 1 x 220 V/300 W is on
Little Star: 1 x R-7- 500 W pole burner is on

CLEANING AND MAINTENANCE

In order to obtain the best ventilation possible, keep the venting slots clean from dust and dirt. We also
recommend frequent cleaning of the lenses and mirrors.
If the lamp burns out the fine-wire fuse of the SUPERSTAR might fuse, too. Replace the fuse by a fuse of
same type and rating.
Should you need any spare parts, please use genuine parts only and give your dealer the serial numbers of
the parts in question when ordering.
Before replacing the lamp, unplug mains lead and let the lamp cool down.
When operating halogen lamps, the lamp will reach temperatures of up to 200°C.
CAUTION :
Do not touch the device's housing bare-handed during its operation!
Do not flash the SUPERSTAR. Flashing the lighting effect will reduce the lamp's life because the resulting
heat cannot be reduced by the ventilating fan.
In general, lighting effects are not designed for permanent operation. Consistent operation breaks will ensure
that the device will serve you for a long time without defects.
In general, lighting effects should not be connected to dimmer packs.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS SUPERSTAR:
Power supply:
Power consumption:
Sound-control:
Dimensions (LxWxH):
Weight:
Fitting lamps:
Please note: All specifications are subject to change withour prior notice.
5/97 © Errors and omissions excepted.
230 V/50 Hz
650 W
via built-in microphone
380 x 450 x 280 mm
14 kg
2 x 220 V/300 W G-6,35
No. 90601710
R-7-s 500 W pole burner
No. 91100400
6