Do not carry out the following operation, since they may damage the printer:
• Do not carry out blank printing in the condition where there is no paper. This may damage the print
head.
• Do not use a power source other than the specified AC adapter.
• Do not drop any foreign subjects like paper clips, or splits pins, etc. into the printer unit.
• Do not spill any drinks or chemical liquid onto the printer units.
• Do not subject this equipment to excessive force such as by standing on the printer, dropping the
printer or hitting the printer.
• Do not operate the operation panel using sharp objects such as the top of a pen etc.
• Do not use sheets of paper by adhering them together with plastic tape, etc..
• Never try to pull the paper forcibly by hand. Also, be careful not to get the paper caught by the printer
cover when opening/closing it.
To avoid injury and prevent damage from occurring.
• Do not touch the printing portion of print head, motor or paper cutter blade. You could be burned or be
cut on the finger.
• During operation, do not touch moving parts such as gears, or the electrical parts inside the printer
units. They may be hot and result in a burn ore other serious injury.
• Take care not to injure yourself or other objects from the edge of the sheet metal.
• If an abnormality occurs during use, immediately stop using the printer and remove the power cable
from the power source outlet.
• If a breakage occurs, do not attempt to disassemble the equipment. Be sure to leave the repair of this
equipment to Service personnel.
• Be careful not to set your hand on fingers caught when opening on closing the cover.
PRECAUTION FOR HANDLING
iDP3310 User's Manual