Paper Specifications; Recommended Paper; Print Position - Citizen iDP3310 Bedienungsanleitung

2.3 Paper Specifications

2.3.1 Recommended Paper

• Type
• Paper width
• Paper thickness
• Roll diameter
• Printed surface
• Recommended paper
• Core
CAUTION :

2.3.2 Print Position

: Thermal paper
: 80 plus 0/minus 1 mm
: 60∼90µm
: φ80mm or less
: Outside of the roll (Surface)
: TF50KS-E2C by Nippon paper Mil. Or other equivalent
: φ12mm (Inner diameter)
• Print quality may vary if you use paper other than specified.
In such case, change print density by dip switch setting.
(See "5. Dip Switch Setting")
• Do not paste the paper to the core.
• Chemicals or oil may change the color of paper, or printed characters may be
vanished.
• Thermal paper color may be changed if scratched with a nail or something sharp.
• Change of paper color starts at approx. 70°C. Pay attention to heat, humidity and sun
light.
5
iDP3310 User's Manual
CITIZEN