Repeat Print Setting; Repeat Print Mode 1 By Command; Repeat Print Mode 2 By Command; Auto-Repeat Print Mode - Citizen iDP3310 Bedienungsanleitung

5.3 Repeat Print Setting

There are four kinds of repeat print modes, including normal print mode. Set them according to
your applications. The input buffer size is 250 bytes for the normal print mode, and 1K bytes for
the other (repeat) three print modes.

5.3.1 Repeat Print Mode 1 by Command

If a reprint command (DC3) is received, reprinting will be performed 10 seconds after printing all the data.
Reprinting is not performed unless the reprint command is received.
The buffer is cleared after reprinting.

5.3.2 Repeat Print Mode 2 by Command

If a reprint command (DC3) is received, reprinting will be performed 2 seconds after printing all the data.
Reprinting is not performed unless the reprint command is received. The buffer is cleared after reprinting.

5.3.3 Auto-Repeat Print Mode

If no data is received within 10 seconds after printing, the automatic print mode will be effected to perform
reprinting, even if there is no reprint command. The buffer is cleared after reprinting.

5.3.4 Normal Print Mode

The received data are printed sequentially. The reprint command is disabled.
If the input data exceeds 1K byte in one of three repeat print modes, the repeat print command or the repeat
print function after the specified time will reprint the preceding 1K byte data.
For the commands, see the 10.PRINT CONTROL FUNCTIONS.
20
iDP3310 User's Manual
CITIZEN