Other Functions; A) Setting Volume At The Outdoor Unit; B) Setting Switch-On Duration Of The Relay; C) Setting Ringing Volume At The Indoor Unit - Conrad 61 17 61 Bedienungsanleitung

11. Other Functions

a) Setting Volume at the Outdoor Unit

On the back of the outdoor unit, there is a small control for the settings (see chapter 6. b,
item 19).
It can be used to set the volume of the speakers in the outdoor unit.
Turn to the right:
Turn to the left:
Use a small screw driver to adjust the setting control. Do not use any force when turning it!

b) Setting Switch-on Duration of the Relay

Use the slider (18) on the back of the outdoor unit to change the switching duration of the relay.
Push upwards towards "ON":
Push downwards:
If a valid access card is held in front of the sensor area (13), the relay is activated for the time
set and e.g. a door opener is switched with it.

c) Setting Ringing Volume at the Indoor Unit

On the left of the indoor unit, there is a small slider (see chapter 6. b, item 10) to set the ringing
volume.
Push upwards:
Push downwards:

d) Sabotage Alarm

If the casing in the outdoor unit is opened, the switch (23) is activated and an alarm signal is
given out.
40
Increase the volume
Decreasing the volume
Switch-on duration = 1 second
Switch-on duration = 5 seconds
Higher volume
Lower volume