Conrad 61 17 61 Bedienungsanleitung Seite 28

• When the product is brought from a cold into a warm room (e.g. during
transport), condensation water may form. This might cause a deadly electric
shock!
Therefore, allow the product to reach room temperature before installing and
operating it.
• Installation and connection must only take place in powered-down condition.
• The mains adapter is categorised as protection class II. It is only intended for
operation under the mains voltage of the public grid.
• Only operate the product via the included mains adapter. Do not use any
other mains adapter for power supply.
• Do not pull the plug-in power supply unit from the mains socket by pulling the
cable.
• If the mains adapter is damaged, do not touch it. Danger to life from electrical
current!
First power down the mains socket to which the mains adapter is connected
(e.g. switch off the respective fuse or turn out the fuse.)
Then unplug the mains adapter from the mains socket. Dispose of the
damaged mains adapter in an environmentally compatible way. Do not use
it anymore.
Replace it with a new mains adapter of the same specifications.
• Use the device only in moderate climate regions and not in tropical climate.
• In commercial institutions, the accident prevention regulations of the Em-
ployer's Liability Insurance Association for Electrical Systems and Operating
Materials are to be observed.
• If the product is used at schools, training facilities, do-it-yourself or hobby
workshops, it has to be supervised by trained personnel.
• Do not leave packaging material unattended. It may become a dangerous toy
for children.
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
28