C) Remove / Delete All Access Cards - Conrad 61 17 61 Bedienungsanleitung

c) Remove / Delete All Access Cards


This may be required if one or several access cards stored in the outdoor unit
are lost.
In this case, all access cards must be removed / deleted and then the existing
access cards can be programmed in again (see chapter 10.a.).
• Briefly hold the programming card "
emitted and the green LED flashes quickly.
The outdoor unit is now in deletion mode.
• Briefly hold the programming card "
sound signals.
• Now briefly hold the programming card "
sound signal and the deletion mode is ended.
• Wait for a few seconds. Then the red LED remains lit.
• Now the access cards must be programmed again, see chapter 9. a).
38
–
" in front of the sensor area (13). A sound signal is
+
" in front of the sensor area (13). You will hear two
–
" in front of the sensor area (13). You will hear one
–
+
–