Conrad 61 17 61 Bedienungsanleitung Seite 35

• The "7" and "8" terminals at the indoor unit terminal strip (8) are directly connected to the "A"
(6) button. With this you can activate, e.g. the stair lighting.

The terminals are potential-free, the max. switching voltage is 30V, the
switching current max. 1A.
This function will prevent situations where you look out the spy hole of your entrance door
and see nothing because the stair light is not switched on.
Of course, the button can also be used for other purposes, e.g. for another door opener, etc.
• The trigger duration of the relay (1 or 5 seconds) can be set with a switch (18). Move the
switch upwards to "ON" to select a time of 5 seconds. For this purpose also see chapter 11.
b).
• After connecting, complete assembly as described in chapter 8.
• Last, connect the mains adapter to the mains voltage plug it into a mains outlet.
The mains adapter must only be connected and operated on dry indoor rooms.
It must not become moist or wet. Fatal danger from electric shock!
35