Kärcher MIC D Bedienungsanleitung Seite 89

6.7.2 Double-acting control hydraulics connection AUX - Blue (optional)
6.7.3 Double-acting control hydraulics connection AUX - Green (optional)
The control of the hydraulic connections takes place via

the joystick.
6.7.2.1 Float position
To activate/deactivate the floating position of AUX red

and blue, operate the relevant button on the joystick.
Note
To operate the AUX connections red and blue, deacti-
vate the respective floating position.
MDC variant (mechanically controlled drive)
The control of the hydraulic connections takes place via

the control lever for AUX - red/blue
AUX Blue - Switch on switch 1 (position 1).

6.7.2.2 Float position
To activate the floating position, push the control lever

all the way to the front.
To deactivate it, move the control lever out of the catch

position.
The control of the hydraulic connections takes place via

the joystick.
MDC variant (mechanically controlled drive)
The control of the hydraulic connections takes place via

the control lever for AUX - Green/Grey/Purple
AUX Green - Switch off switch 2 (position 0).

Note
The connections for AUX Grey/Purple are located at
the back of the vehicle.
32
-
EN 89