4.16 Console In The Back; Ignition Switch - Kärcher MIC D Bedienungsanleitung

4.16 Console in the back

4.16.1 Ignition switch

4.16.2 Rotary knob lowering speed front power lift
76
1 Ignition lock
2 On board socket 12 V
3 Rotary knob lowering speed front power lift
4 Rotary knob attachment discharge (optional)
1 Position STOP: Engine off
2 Position I: Ignition on
3 Filament symbol : Pre-heat
4 Position II: Start motor
A Direction of rotation "Increase lowering speed"
B Direction of rotation "Decrease lowering speed"
The rotary knob for the lowering speed is used to adjust
the lowering speed of the front implement frame.
Turning into the direction of rotation B to the limit stop

locks the front power lift.
Note
Is required for transport runs on public roads to lock the
hydraulics of the working appliances.
19
-
EN