4.12 Front Console - Kärcher MIC D Bedienungsanleitung

4.12 Front console

4.12.1 Joystick (not with MDC variant)
4.12.2 Diagram control lever
1 Joystick
2 Control lever
3 Preselection driving programmes
1 Driving direction selector switch
2 Indicator travel direction preselection "forward"
3 Indicator travel direction preselection "reverse"
4 Not assigned
5 Double acting hydraulic connection
AUX green
6 Double acting hydraulic connection
Floating position AUX red
7 Double acting hydraulic connection
Floating position AUX blue
8 AUX blue
The joystick controls all front attachments.
The rear attachments are controlled via the control lever.
The joystick can be moved into the X and the Y direction.
Movements in the X-direction (left and right) control the
–
connected attachments.
Movements in the Y-direction (front and back) lift or
–
lower the front implement carrier on which the attach-
ment is mounted.
0 Neutral position
1 lower and press down, lever will not lock in
2 lowered, floating position, attachment follows the
floor contour (e.g. brush), lever snaps into place
3 raise, lever will not lock in
4 Forward travel direction
The control lever is used to lift and lower the tilting device.
After activating the "AUX back/tilting device" switch, the
control lever controls an attachment that is connected to
AUX back.
16
-
EN 73