Multifunction Display; Warning Lights - Kärcher MIC D Bedienungsanleitung

4.9.6

Multifunction display

4.9.7

Warning lights

4.9.7.1 Red warning lights
WARNING
Immediate measures for rectification of the error must be
taken.
Error: Motor oil pressure missing or too low.

Action: Switch off the motor and refill motor oil.
Error: Hydraulic oil temperature too high.

Action: Discontinue work and switch off hydraulic con-
sumers. Stop and let the motor run at 2000 1/ min, this
way the hydraulic oil cools down again. Refill hydraulic
oil if necessary.
Hydraulic oil temperature too low .

Remedy: Let the motor idle until the hydraulic oil has
reached the right temperature.
4.9.7.2 Yellow warning lights
ATTENTION
In accordance with the indicator, corrective actions must
be taken as soon as possible.
4.9.7.3 Green and blue indicators
Note
They show the current activities of the vehicle.
1 Indicator lamp for position lights
2 Indicator lamp for high beam
3 Not assigned
4 Service display: lights up if the respective service work
needs to be performed
5 Warning lamp fuel reserve
6 Warning light parking brake operated
7 Warning lamp for battery charge indicator
8 Not assigned
9 Warning light drive / error indicator
10 Not assigned
11 Warning light motor oil pressure
12 Warning light hydraulic oil temperature (too low / too
high)
13 Warning light air filter
14 Warning light hydraulic oil filter travel drive (hydraulic oil
filter clogged)
15 Not assigned
16 Indicator lamp differential lock active
17 Indicator lamp for direction indicator
18 Indicator lamp cruise control activated
19 Operating hour counter
20 Motor speed
21 Tank indicator
22 Symbol: Turtle (indication with transport mode slow)
23 Symbol: Rabbit (indication with transport mode fast)
24 Coolant temperature motor
14
-
EN 71