4.13 Middle Console - Kärcher MIC D Bedienungsanleitung

4.12.3 Control lever (MDC variant)

4.13 Middle console

74
MDC variant (mechanically controlled drive)
1 Control lever for front power lift
2 Control lever for AUX red/blue
3 Control lever for AUX green/grey/purple
The front and rear attachments are controlled via the con-
trol lever.
1 Hand throttle - preselection of the motor speed
2 Selector switch for hydraulic PTO
3 PTO on/off
Position 1: Switching on the PTO
Push the black button and pull the pushbutton
Position 0: Switching off the PTO
Push down the pushbutton
4 Cruise control
5 Differential lock
6 Electric PTO front
7 Electric PTO rear
8 Changeover double acting control hydraulics AUX rear
left/lifting platform
9 Main switch floating position
10 Dump valve (quick lowering mechanism for AUX rear)
11 Switch attachment discharge (optional)
Caution: This switch is responsible for the vibration
damping as well as for the attachment discharge (both
options are not possible at the same time)
12 Switch 2: Switch AUX green to grey or purple (MDC
variant only)
13 Switch 1: Switching AUX red to blue (MDC variant only)
14 Overriding the floating position switch (PTO usable
without floating position)
Caution: Only use with attachments that require this
function!
15 Hazard warning lights switch
17
-
EN