General Description (Fig. 1) - Philips AVENT SCD498 Bedienungsanleitung

EngliSh
6
introduction
Philips Avent is dedicated to producing caring, reliable products that give parents the reassurance
they need. This Philips Avent baby monitor provides round-the-clock support by ensuring you can
always hear your baby clearly without any distracting noise. The DECT technology guarantees zero
interference from other wireless appliances and a clear signal between the baby unit and the parent
unit.

general description (Fig. 1)

Baby unit
A
1 On/off button 3
2 ON light
3 Volume +/– buttons
4 Battery check light T
5 Nightlight
6 Nightlight button Q
7 PAGE button
8 Microphone
9 Adapter
10 Small plug
11 Battery compartment lid
12 Socket for small plug
13 Battery compartment
Parent unit
B
1 TALK button
2 LINK light
3 SENSITIVITY button
4 On/off button 3
5 Opening for belt clip and neck strap
6 Sound level lights
7 Volume +/– buttons
8 Battery check light T
9 Microphone
10 Loudspeaker
11 Battery compartment
12 Belt clip
13 Battery compartment lid
14 Neck strap
15 Adapter
16 Charger
17 POWER light
Travel pouch
C
important
Read this user manual carefully before you use the appliance and save it for future reference.
This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult
,
supervision and should not be used as such.
Check if the voltage indicated on the adapters of the baby unit and the charger corresponds
,
to the local mains voltage before you connect the baby unit and the charger.
Use and store the appliance at a temperature between 10°C and 0°C.
,
The appliance is suitable for mains voltages from 0 to 0V.
,
Do not expose the baby monitor to extreme cold or heat or to direct sunlight.
,