Herunterladen Inhalt Inhalt Diese Seite drucken

Basic Operation; Switching On/Off; Selecting The Signal Source; Loading Usb Devices - Omnitronic DJS-2000 Bedienungsanleitung

Media-player und midi-controller für djs
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6

BASIC OPERATION

Switching On/Off

1
Switch on the DJS-2000 with the rear power
button.
• After a short initialization process (indication
„Hello DJ") the unit will automatically detect if
a USB device is inserted in USB port 1
(indication "Connecting").
• If a USB device is inserted, the display will
indicate information concerning the first title
after the read-in.
• If no USB device is inserted "Please insert
memory device" will be displayed.
2
Prior to switching the unit off, always
terminate the playback with the button [►II].

Selecting the Signal Source

After switching on, the USB port USB 1 is always
selected as the signal source. Press the selector
switch SOURCE to switch to a different signal
source. Short actuation allows switching between
the two USB ports USB 1 and 2 as well as the CD
drive. Long actuation switches to MIDI mode.
• The unit must be in pause mode.
• The LEDs will verify which source is active.

Loading USB Devices

1
For the use of USB devices, USB port 1 is
provided at the front and USB port 2 at the
rear panel. Insert USB devices here.
• First, the display indicates "Connecting" and
after the read-in (indication "Reading8"), the
total number of titles and folders will shortly
be indicated. Then information concerning
the first title will follow.
• If a data carrier is not recognized at the first
try, remove it and insert it again.
2
To remove a USB device, disconnect it from
the USB port.
• Prior to removing a USB device, set the unit
to pause. Otherwise damage or loss of data
may occur.

Inserting a CD

1
Insert the CD with the lettering facing
upwards into the slot until it is retracted
automatically.
• The display will show "Close".
• After the read-in (indication "Reading8"), the
total number of titles and folders will shortly
be indicated. Then information concerning
the first title will follow.
2
Press the button [ ] to eject the CD.
• The display will show "Eject".

Selecting titles and folders

Fig. Audio file playing order
1
For browsing the titles, turn the press control
TRACK [
• Title number and title name (MP3 files only)
are indicated in the display.
• If you keep the control pressed while turning
it at the same time, you can jump 10 titles
forward or backward.
2
For browsing the folders, turn the button
FOLDER [
].
• The folder number and name are indicated in
the display.
• If you keep the control pressed while turning
it at the same time, you can jump 10 folders
forward or backward.
50
].

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis