Fader Start; Usb Link Operation - Omnitronic DJS-2000 Bedienungsanleitung

Fader Start

The player can be started or set to pause via an external mixer with fader start function. Use the supplied
3.5 mm jack cable to connect the output RELAY on the mixer.

USB Link Operation

When two DJS-2000 are connected via USB for USB Link operation, a secondary player can access a USB
device inserted in the main player. Both players can access the same USB medium and play titles
simultaneously.
Follow these steps for USB Link operation:
1
Call the system settings on the main player with the button ENTER.
2
Browse the main menu with the press control FOLDER [
3
Turn the jogdial to the left, until the display indicates USB = LINK. Press the button ENTER to save the
setting and exit the system settings. Insert the USB device into USB port 1 on the top panel of the main
player.
4
Connect the jack USB MIDI on the main player to the USB port 1 on the on top panel of the secondary
player with the supplied USB cable. The display on the secondary player inserts "Connecting".
5
After the read-in, the secondary unit can access the USB device inserted in the main unit.
RCA cable
Mini jack cable
DJS-2000
Main unit
49
RCA cable
Mini jack cable
DJ mixer DJS-2000
Secondary unit
] and select menu item "MIDI Setup".