Troubleshooting - VOLTCRAFT VC870 Bedienungsanleitung

Troubleshooting

In purchasing the DMM, you have acquired a product which has been designed to the state of the
art and is operationally reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions
yourself.
Always follow the safety instructions!
Error
The multimeter does not
work.
No measuring value change.
The meter beeps and the
"WARNING!" symbol flashes
Repairs other than those described above may only be carried out by an authorised spe-
cialist. Proceed to page 34 where you will find the section with the Full Service
Hotline.
Possible cause
Is the battery dead?
Is a wrong measuring function
activated (AC/DC)?
Are the measuring lines
inserted tightly into the
measuring jacks?
Is the fuse defect?
Is the HOLD function activated? Press the button "H" to
(display "H").
Wrongly connected or
unsuitable measuring outputs.
Remedy
Check the status.
Replace the battery
Check the display (AC/DC)
and switch the function if
applicable.
Check the proper fit of the
measuring lines
Check the fuses.
deactivate this function.
Connect measuring lines
properly to the onnect meter,
meter or change the measuring
function.
59