Promax HD RANGER/+ Bedienungsanleitung Seite 148

Name
Description
Order
Name
Description
Order
Name LNB
Description
It provides / configures the LNB output
Question *?LNB lnb
Response *LNB lnb = lnb_resp
lnb
OUTPUT
ENABLE
VOLTAGE
CURRENT
AVAILABLE
UNDERVOLTAGE
OVERCURRENT
SHORTCIRCUIT
DRAINLED
Configuration *LNB lnb = lnb_conf
lnb
ENABLE
ENABLE
OUTPUT
BEDIENUNGSANLEITUNG
INSTALLATION PC ZIP
It sends a file from a PC to the equipment zipped with all files of
the installation
*INSTALLATION ZIP NAME=name SIZE=size BLOCK=bbbb
name Description name
abcd Name ("abcd") of the installation
size Description size
nnn Byte (nnn decimal) size of the file when sent
bbbb Description bbbb
nnn Byte size (nnn decimal) of blocks that will be sent from
the ZIP file
INSTALLATION REMOVE
It removes an installation
*INSTALLATION NAME= name REMOVE
name Description name
abcd Installation name ("abcd")
-
148 -
Description lnb_resp
Current selected output
LNB enable (ON) or disabled (OFF)
Last measurement of the LNB output
voltage
Last measurement of the LNB output
current
Available output with the current
configuration
Under voltage alarm
Overvoltage alarm
Short circuit alarm
LED DRAIN lit (ON) or not (OFF)
lnb_conf Description lnb_conf
ON Enables the LNB.
OFF Disables the LNB.
nnn LNB output voltage (nnn must
be one of the available options
seen on the command *?LNB
AVAILABLE)
RANGER/