GB
Trouble Shooting
Problem
Appliance
won't start
Intermittent op-
eration
Knife bar be-
comes hot
Bad trim
5 4
Possible cause
Battery (
9) discharged
Battery (
9) not inserted
Safety switch (
4) not
pressed properly
On/Off switch (
tive
Internal loose contact
On/Off switch (
tive
Knife bar (
2) is blunt
Knife bar (
2) is notched
Too much friction due to
lack of lubrication
Too much friction due to
missing lubrication
Knife bar (
2) dirty
Knife bar (
2) blunt
Bad cutting technique
Battery (
9) not fully
charged
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Turn on (see "Operation")
7) defec-
Send in to Service Centre for repair
Send in to Service Centre for repair
7) defec-
Have the Knife bar sharpened or re-
placed (Service Centre)
Have the Knife bar checked or re-
placed (Service Centre)
Oil the knife bar (
Lubricate knife bar (
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trim-
mer")
Recharge battery (see "Charging")
2)
2)